Due to its greater width, it is particularly suitable for Roof drains, gullies, fans, aerators and transitions subject to increased mechanical stress<\/strong>.<\/p>\n
The fleece ensures even stress distribution, high crack bridging and permanent integration into liquid waterproofing, bitumen and PU systems.<\/p>\n
\n
Applications<\/h3>\n\n- \n
Reinforcement of Roof drains, gullies and drainage points<\/strong><\/p>\n<\/li>\n- \n
Waterproofing of aerators, fans and pipe penetrations<\/strong><\/p>\n<\/li>\n- \n
Transitions between roof surface and upstand<\/p>\n<\/li>\n
- \n
Inside and outside corners with greater overlap requirements<\/p>\n<\/li>\n
- \n
Partial reinforcement of flat roofs during renovations<\/p>\n<\/li>\n
- \n
Reinforcement of critical detail areas subject to increased stress<\/p>\n<\/li>\n<\/ul>\n
Benefits at a glance<\/h3>\n\n- \n
Greater coverage for complex details and penetrations<\/p>\n<\/li>\n
- \n
Ideal for round and geometrically complex components<\/p>\n<\/li>\n
- \n
High tear resistance and dimensional stability<\/p>\n<\/li>\n
- \n
Uniform stress distribution within the waterproofing layer<\/p>\n<\/li>\n
- \n
Easy to cut and flexible to process<\/p>\n<\/li>\n
- \n
Compatible with liquid waterproofing, bitumen and PU systems<\/p>\n<\/li>\n
- \n
Certified quality according to DIN EN ISO 10319<\/p>\n<\/li>\n<\/ul>\n
Certified quality<\/h3>\n
(iBMB MPA Braunschweig, Test report no. 22188\/2024)<\/em><\/p>\n\n- \n
Tensile strength (N\/50 mm): longitudinal 152, transverse 110<\/p>\n<\/li>\n
- \n
Elongation at maximum tensile force (%): longitudinal 52.5 %, transverse 79.2 %<\/p>\n<\/li>\n
- \n
Elongation at break (%): longitudinal 53.0 %, transverse 81.1 %<\/p>\n<\/li>\n<\/ul>\n
These values confirm the high elasticity and resilience of the material \u2013 ideal for detail areas that must permanently accommodate movement.<\/p>\n
Technical data<\/h3>\n\n- GSM: 110 g\/m\u00b2<\/strong><\/li>\n
- Roll size: 0.35 \u00d7 50 m<\/strong><\/li>\n
- Colour: white<\/strong><\/li>\n
- Material: 100 % Polyester (PES)<\/strong><\/li>\n
- Application: Reinforcement of liquid waterproofing membranes<\/li>\n
- Substrate: bitumen, PU, PMMA, liquid waterproofing<\/li>\n<\/ul>\n
Practical examples<\/h3>\n\n- \n
Reinforcement of gullies during flat roof renovations<\/p>\n<\/li>\n
- \n
Waterproofing of roof vents and aerators<\/p>\n<\/li>\n
- \n
Reinforcement of transitions in older roof structures<\/p>\n<\/li>\n
- \n
Partial reinforcement before applying new waterproofing<\/p>\n<\/li>\n
- \n
Remediation of damage-prone drainage details<\/p>\n<\/li>\n<\/ul>\n
Instructions for use<\/h3>\n\n- \n
Thoroughly clean the surface and ensure it is dry and load-bearing.<\/p>\n<\/li>\n
- \n
Embed the fleece into the fresh liquid waterproofing material and fully saturate it.<\/p>\n<\/li>\n
- \n
Overlap of the lanes approx. 5\u201310 cm<\/strong><\/p>\n<\/li>\n- \n
Pay particular attention to incorporating details, especially at processes and penetrations.<\/p>\n<\/li>\n
- \n
Then fully cover with waterproofing material.<\/p>\n<\/li>\n<\/ul>\n
What width is suitable for my project?<\/h3>\n
Reinforcement of Roof drains, gullies and drainage points<\/strong><\/p>\n<\/li>\n Waterproofing of aerators, fans and pipe penetrations<\/strong><\/p>\n<\/li>\n Transitions between roof surface and upstand<\/p>\n<\/li>\n Inside and outside corners with greater overlap requirements<\/p>\n<\/li>\n Partial reinforcement of flat roofs during renovations<\/p>\n<\/li>\n Reinforcement of critical detail areas subject to increased stress<\/p>\n<\/li>\n<\/ul>\n Greater coverage for complex details and penetrations<\/p>\n<\/li>\n Ideal for round and geometrically complex components<\/p>\n<\/li>\n High tear resistance and dimensional stability<\/p>\n<\/li>\n Uniform stress distribution within the waterproofing layer<\/p>\n<\/li>\n Easy to cut and flexible to process<\/p>\n<\/li>\n Compatible with liquid waterproofing, bitumen and PU systems<\/p>\n<\/li>\n Certified quality according to DIN EN ISO 10319<\/p>\n<\/li>\n<\/ul>\n (iBMB MPA Braunschweig, Test report no. 22188\/2024)<\/em><\/p>\n Tensile strength (N\/50 mm): longitudinal 152, transverse 110<\/p>\n<\/li>\n Elongation at maximum tensile force (%): longitudinal 52.5 %, transverse 79.2 %<\/p>\n<\/li>\n Elongation at break (%): longitudinal 53.0 %, transverse 81.1 %<\/p>\n<\/li>\n<\/ul>\n These values confirm the high elasticity and resilience of the material \u2013 ideal for detail areas that must permanently accommodate movement.<\/p>\n Reinforcement of gullies during flat roof renovations<\/p>\n<\/li>\n Waterproofing of roof vents and aerators<\/p>\n<\/li>\n Reinforcement of transitions in older roof structures<\/p>\n<\/li>\n Partial reinforcement before applying new waterproofing<\/p>\n<\/li>\n Remediation of damage-prone drainage details<\/p>\n<\/li>\n<\/ul>\n Thoroughly clean the surface and ensure it is dry and load-bearing.<\/p>\n<\/li>\n Embed the fleece into the fresh liquid waterproofing material and fully saturate it.<\/p>\n<\/li>\n Overlap of the lanes approx. 5\u201310 cm<\/strong><\/p>\n<\/li>\n Pay particular attention to incorporating details, especially at processes and penetrations.<\/p>\n<\/li>\n Then fully cover with waterproofing material.<\/p>\n<\/li>\n<\/ul>\nBenefits at a glance<\/h3>\n
\n
Certified quality<\/h3>\n
\n
Technical data<\/h3>\n
\n
Practical examples<\/h3>\n
\n
Instructions for use<\/h3>\n
\n
What width is suitable for my project?<\/h3>\n
![\"\u2714\"](\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\")
\u00a0Free shipping within Germany